![]() |
Photovoltaik Testfläche Odersun, Deutschland, 03/2009 - 09/2009 |
Die Odersun AG betreibt zwei Produktionsstätten für Photovoltaikmodule in dieser Gegend: SunOne in Frankfurt (Oder) und SunTwo in Fürstenwalde (Spree). Zur Weiterentwicklung der Produktionsstätte, errichtete die Odersun AG zwei Photovoltaikanlagen in Fürstenwalde.
![]() | ![]() |
Photovoltaische Module aus den beiden Fabriken SunOne und SunTwo kamen bei beiden Anlagen zum Einsatz. Die Anlagen wurden alsFreiflächen angelegt und erlauben einen natürlichen Bewuchs des Bodens, wodurch ein harmonisches Außenbild erreicht wird. Die Errichtung beider Anlagen wurde 2009 abgeschlossen.
In den Freiflächenanlagen wurden unterschiedliche Modulgrößen mit verschiedenen Wechselrichtern installiert. Die Module sind dabei auf Stützen in einem festen Winkel angeordnet, optimiert nach dem günstigsten Sonneneinfallswinkel. Die Einspeisung in das örtliche Stromnetz ist vorgesehen.
![]() |
PV Test Area Odersun, Germany, 03/2009 - 09/2009 |
Odersun AG runs two production sites for photovoltaic modules in Germany area: SunOne in Frankfurt, Oder and SunTwo in Fürstenwalde, Spree. In the process of a further development of the production site, Odersun AG erected two photovoltaic plants in Fürstenwalde.
![]() | ![]() |
Pholtaic modules produced in the factories SunOne and SunTwo are used on the sites. The plants are run as an open area and allow a natural plant cover of the ground. By this, the impression of a harmonic development is given. The erection of both sites was finished in 2009.
In the open space plants, different sizes of modules are installed with various inverted rectifiers. The modules are based on pedestalles in a fixed angle, optimized corresponding to the arrival angle of the sun. The electricity is fed into the electric network of a regional supplier.
![]() |
Installation photovoltaïque - test Odersun, Allemagne, 03/2009 - 09/2009 |
Odersun AG a deux sites de production de modules photovoltaïques. SunOne se situe à Francfort (Oden), et SunTwo à Fürstenwalde (Spree). Odersun AG a décidé de construire deux installations photovoltaïques à Fürstenwalde afin de faire face au développement à venir des sites de production.
![]() | ![]() |
Les modules photovoltaïques produits à SunOne et SunTwo sont utilisés sur ces sites. L'installation est une "zone ouverte" et couvre le sol de façon naturelle. Cela donne une impression de développement harmonieux. La construction des deux sites a été terminée en 2009.
Sur cette installation on retrouve plusieurs tailles de modules et différents onduleurs. Les modules sont installés sur des piédestaux avec un angle fixe, celui-ci étant optimum par rapport au rayonnement solaire. L'électricité produite est redistribuée sur le réseau électrique régional.